VITALink® Armored Fire Resistive

Construction:

Conductors: 14 AWG Solid Bare Copper
Tape: Heat Resistant Tape
Insulation: LZSH Thermoset Fire-Roc™
Cable Assembly: Red & Black Pairs
Binder: White Fire-Roc™ Binder
Armor: CCW Copper
Optional Jacket: Non-Halogen Flame Retardant Polyolefin

Applications:

Low voltage critical circuits where increased physical protection is required.

Transit tunnels & platforms
Underground & below grade structures
Petrochemical, nuclear, and waste treatment facilities

36516, 36517, 36518, 36519, 36520, 36521, 36522, 36523

Part Numbers & Specs

Spec	Part Number	Number of Conductors	Nominal Core Diameter (in/mm)	Nominal Armor Diameter (in/mm)	Nominal Cable Diameter over Outer Jacket (in/mm)	Approximate Net Weight (Lbs/1000 ft.)
No Overall Jacket
Spec	36516	2	0.334/8.484	0.620/15.748	N/A	264
Spec	36517	4	0.504/12.802	0.840/21.336	N/A	447
Spec	36518	6	0.538/13.665	0.880/22.352	N/A	506
Spec	36519	8	0.605/15.367	0.920/23.368	N/A	589
With Overall Jacket
Spec	36520	2	0.334/8.484	0.620/15.748	0.684/17.374	306
Spec	36521	4	0.504/12.802	0.840/21.336	0.934/23.724	532
Spec	36522	6	0.538/13.665	0.880/22.352	0.974/24.740	601
Spec	36523	8	0.605/15.367	0.920/23.368	1.024/26.100	682

Notes:

Refer to installation instructions for hardware certifications
Refer to R27557 Fire Resistive Cable (UL)
VITALink® Brand Type FPLR-ST1, CL3R-ST1, CSA FAS105 ST1 FT4 for use in System No. FHIT.40B and FHIT7.40B
Authorities having Jurisdiction should be consulted before installation

Compliance:

UL Listed Type FPLR-ST1
UL Listed CL3R-ST1
CSA Listed FAS 105 ST1 FT4
UL Subject 1424 for Power Limited Fire Alarm Circuits; 300V/105°C Classified
UL Subject 13 for Power Limited Circuit Cables; 300V/105°C Classified
ANSI/UL 2196 2 Hour Fire Rating for use in FHIT System 40B
CAN/ULC-S139 2 Hour Fire Rating with Hose Stream fro use in FHIT7 System 40B
NFPA 70 & 72
California State Fire Marshal
RoHS Compliant